FVS336G CASE STUDY

Router and Network Management For example, your VPN firewall will log security-related events such as: You can enter information in the Add Known PCs and Devices section and click Add to manually add a device to the database. Then enter the user name and password to be used for authentication. To monitor the status of the WAN ports: The Firewall Logs can be configured to log and then e-mail denial of access, general attack information, and other information to a specified e-mail address. DHCP can be either Server.

If the E-mail Logs options as been enabled, you can send a copy of the log by clicking Send. To view the router configuration and system status:. Select an NTP Server option: This timer is restarted whenever incoming or outgoing traffic is received. Enter the name of the log in the Log Identifier field. The Router Status screen is displayed.

The service port number of the initiating device, and whether it originated from the.

FVSGEUS , FVSGEUS Product Comparison at Systemsassurance

Send To E-mail Address. To view the most recent entries, click refresh log.

In the When limit is reached section, make the following choice: Enter an e-mail address to appear as the sender. Figure The status window displays the following information: You can enter information in the Add Known PCs and Devices section and click Add to manually add a device to the database. Cxse you leave this box blank, no logs will be sent to you. The specified restrictions will be applied to both incoming and outgoing traffic only.

  PCU PIGMAN THESIS

Click Yes to enable SysLogs and send messages to the syslog server, then: As this information is read-only, any changes must be made on other pages.

Netgear ProSafe Dual WAN Gigabit Firewall w SSL IPSEC VPN FVSG EUS Networks Routers

Check Yes to enable E-mail Logs. Group Each PC or device must be in a single group. Figure Monitoring System Performance Log Identifier is a mandatory field used to identify which device sent the log messages. Select the appropriate syslog facility from the SysLog Facility pull-down menu.

Then enter the user name and password to be used for authentication. If the E-mail Logs options as been enabled, you can send a copy of the log by clicking Send.

Univex ProSafe FVS336G User Manual

Both incoming and outgoing traffic are included in the limit. DHCP can be either Server.

These requests also generate an entry in the database. PCs and other LAN devices become known by the following methods: The MAC address is a low-level network identifier. A primary and secondary backup server are preloaded. For each PC or device, the following data is displayed Czse Firmware Version This is the current software the router is using. It also is displayed if: The Router Status screen is displayed.

  HIDETOSHI SATO CRUEL ANGEL THESIS TABS

fvs336g case study

The name of the port triggering rule associated with this entry. The LAN Groups screen will display.

fvs336g case study

To view the LAN Groups screen: State The current status of the SA. The name of the PC or device. To monitor traffic limits on each of the WAN ports: Click Yes to fva336g SysLogs and send messages to the syslog server, then:. The specified restrictions will be applied to the incoming traffic only.

Author: admin